classic cast stone address block has deeply etched numbers and letters.
Dimensions: 15.5" W x 12"
H x 2" D
Weight: 18 lbs.
* High quality address
* Acid washing finish
is available. (Acid washing gives the address block a rough look, exposing the
sand underneath the top surface. The degree of acid wash will vary.)
* Can be installed
into brick or a wall or surface mounted
* Some variation in
color is normal
* Made in USA
address block is available as a one-line plaque, two line plaque, or a one-line
plaque with a graphic.
ONE LINE PLAQUE (with graphic)
Holds up to a maximum of six 6" numbers or six 4.5" letters. Size may
vary depending upon the graphic size.
TWO LINE PLAQUE (no graphic)
Holds up to a maximum of six 4.5" characters
Holds up to a maximum of twenty 1.5" characters
"holes" option is selected, the manufacturer drills 1/4" dia x
3/4" deep "blind" mount holes in the back of the block. Two
threaded steel rods for mounting are provided. If "no holes" are
selected, no studs are provided. Installation of the inset plaque is
handled by the mason.
Instructions for surface mount