The large classic cast
stone address block has deeply etched numbers and letters.
SIZE
Dimensions:
15.5"W x 12"H x 2"D
Weight: 25 lbs.
FEATURES
* Light weight, high
quality address plaque
* Extremely durable.
* Acid washed texture
is available. (Acid washing gives the address block a rough look, exposing the
sand underneath the top surface. The degree of acid wash will vary.)
* Can be
installed into brick or a wall or surface mounted.
* Complete mounting
instructions are included. If drilled holes are indicated, a hole about 1/3 of
the way from the top will be drilled on each side. Because of the material
used, there will be some variation in color, so the exact color cannot be
guaranteed.
* Made in USA
PERSONALIZATION
The address block is
available as a one-line and two-line plaque.
ONE LINE PLAQUE
Line 1: Holds up to
six 7" numbers or six 5" letters
TWO LINE PLAQUE
Line 1: Holds up to
six 5" characters
Line 2: Holds up to
twenty 1.5" characters
MOUNTING
When the
"holes" option is selected, the manufacturer drills 1/4" dia x
3/4" deep "blind" mount holes in the back of the block. Two
threaded steel rods for mounting are provided. If "no holes" are
selected, no studs are provided. Installation of the inset plaque is
handled by the mason.
Mounting
Instructions for surface mount
[ITEMPRICE]